Service Actions

XUV700 Wiring Loom routing | Service Action | Mahindra Auto

What is the Condition?

There is a potential risk of abrasion cut of wiring loom that may lead to elevated heat loads due to excess current drawn.

What will Mahindra do?

We are contacting our customers on an individual basis, whose vehicles might be affected with the above-mentioned conditions to intimate and try to minimise the inconvenience caused due to this service action. The service action requires inspection and routing of the component. This activity will be performed at ZERO COST to you.

What should you do?

Since the vehicle purchased by you falls in the said batch of vehicles manufactured between 8th June 21 to 28th June 23, please contact your authorized Mahindra dealer to make an appointment to facilitate a vehicle inspection as soon as possible. However, depending upon the dealer’s work schedule/load and the inspection results, it may be necessary to make your vehicle available for a certain period of time at the workshop. We advise that you get this activity completed as soon as possible.

What if you have other questions in this respect? 

Your local authorized Mahindra dealer will be more than happy to answer any of your questions and set up an appointment to perform this important activity. If you require further assistance, you may also contact our 24x7 Mahindra Customer Relationship Center at 1800-209-6006.

Check Service Action

Enter your Mobile Number

Enter your Vehicle Serial Number (Last 8 digits of the 17-digit VIN)